Can my business stay open while the work runs?
Often partly. Containment lets one area dry under negative pressure while adjoining space stays in use, so the realistic question is how much floor space closes and for how long, not whether the whole premises shuts.
What decides it is where the water went and what the space is used for. A back stockroom can usually be sealed off with the shop trading. An open-plan floor with wet carpet across it cannot be half-dried, and a food or healthcare setting has standards of its own that override convenience. The technician's job is to say which of those you have on the first visit, with a zone plan, rather than to promise business as usual and then take over the whole floor on day two.
Who is responsible when water crosses between tenancies?
That is a question for the lease, the owners and their insurers. What restoration contributes is evidence: readings on both sides of the boundary, photographs and a record of how far water traveled and when each area was dry.
In a mixed-use brick building the structure itself is shared, so water from one unit becomes the next unit's damage through a floor assembly or a party wall. The practical advice is to get the measurements taken on both sides early, while the evidence is wet and visible, and to make sure the landlord or managing agent is told at the same time as the insurer. Nothing on this page is legal advice about a lease.
How does a commercial job differ from a house?
Scale, zoning and documentation. Commercial work means larger equipment loads, drying in stages so parts of the premises stay usable, multiple interested parties, and records kept for a tenant, an owner and an insurer at once.
There is also a different clock. In a house the cost of delay is inconvenience; in a business it is revenue, so the sequence is built around trading hours, deliveries and staff access, and some of the work happens outside opening times. The drying itself follows the same physics as a house: extraction, remove what cannot be dried, dehumidify, and log readings until the material matches the dry parts of the same building.
What moves the price of commercial restoration up or down?
Floor area affected, the number of zones and tenancies, how much equipment runs and for how many days, out-of-hours access, the construction of the building, and whether contaminated water or stock loss is involved.
Two premises of the same square footage can differ sharply. A single open floor with carpet tile over concrete dries with a predictable equipment set. The same area split across three tenancies in an 1890s brick building, with a cellar, a suspended ceiling and work that can only be done after closing, carries more labor, more containment and a longer drying schedule. Contaminated water, refrigeration loss and records that need handling add scope again. Albany Water Damage Restoration sets out the scope and what it covers and gets it approved before work starts; no figure is published here because the premises decides it.
What should a business do in the first hour?
Stop the water if a valve is reachable, cut power to the wet area, get people out of it, and move stock, records and equipment up off the floor. Then photograph everything before anything else is moved.
The photographs are the part businesses skip and later need, because the first hour is the only time anyone sees the loss as it was. Take wide shots of each affected area and close shots of damaged stock and equipment, note the time, and start a list as things are moved. Tell the insurer and, if you lease, the landlord or managing agent the same day. Then call: phones here are answered 24/7 and a crew is dispatched as soon as one is available.